All the products are bench-top-able, CE certified and ISO14000 compliant!

For general lab research, e.g. cutting, pressing, milling, high temperature oven, and battery making.

Home	Wafer Carrier	GelPak Carrier	Ultrasonic Cleaner	Membrane Box	Package
Tweezers	Optical Fibre	Photodetector	Button Cell Battery	Module Carrier	Others

Oven/Furnace	Polisher	Saw	Crimping Machine	Hydraulic Presser
Precision Disc Cutter	Digital Scale	Hot Plate	Milling Machine	Grinder


Vacuum Oven (250C) HP8-EQ-DZF-6020	Vacuum Flange Furnace HP8-GSL-1100X	Muffle Furnace (1100C) HP8-EQ-KSL-FB1318M	Furnace with Laptop control HP8-EQ-KSL1100X-PC	Muffle Furnace (1700C) HP8-KSL-1700X

Vacuum Furnace with Quartz Chamber HP8-VF1200D8	Section Saw ( 8") HP8-SYJ-200	Diamond Saw ( 4") HP8-MT-4	Grinder/ Polisher (3") HP8-Unipol-300	Grinder/Polisher with Magnetic Plates HP8-Unipol-830

Ball Mills with 4 jars HP8-SFM-1	Vibrating Ball Mill HP8-SFM-3	Precision Digital Scale HP8-iB601	Hot Plates (300C) HP8-EQ-SH-3	Digital Hot Plates (540C) HP8-EQ-SP-131320Q

Electric Hydraulic Presser HP8-YLJ-20T	Electric Hydraulic Presser HP8-YLJ-40T	Flat Hot Presser (260C) HP8-EQ-HP-58V220

HP8-EQ-DZF-6020
Bench-Top Vacuum Oven (12x12x11", 25 L, 250C)

Product Description:

Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications
3" (7.6 cm) glass wool insulation prevents heat loss from working chamber
Silicone door gasket and positive latch door maintain seal at all vacuum levels
Exclusive polycarbonate safety shield protects door glass
Vacuum fittings require .25" (6.35 mm) I.D. tubing
Easy-to-clean #304 stainless steel chamber interior
Vacuum and air lines constructed with corrosion-resistant stainless steel tubing for optimum chamber cleanliness and long term performance.
One removable stacking aluminium shelves included

Operation:

Operating temperature range from room temperature to 250C ( 300C Max for less than 60 minutes )
Vacuum level displayed on gauges from 0 to 30" Hg.
PID precision Digital Power controller control temperature to +/-1.5C with a uniformity of +/-5C @ 100 C; 25" Hg at centre hot zone, e.g 6'x6' centre area only ) and built-in over temperature protection
Require a vacuum pump to connect the oven ( not included )
For accurate temperature, you shall calibrate temperature by temperature calibrating kit by yourselves, and set up temperature in controller. For more information how to calibrate oven temperature and set temperature off
How to calibrate this oven

Specifications:

Voltage:       Standard 220 VAC 60 Hz.
Power:          1000 W
Inner Chamber size:   300 mm x 300 mm x 275 mm    ( 12 x 12 x 11", 25 Litre )
Outside size:   590 x 490 x 450 mm (24" x 20" x 18")
Vacuum :    < 133pa
Shipping size:   650 x 550 x 500 mm (40" x 25" x 23")
Shipping weight:   170 Lb

HP8-EQ-KSL1100X-PC
Computerized Box Furnace with Laptop and Control Software (1200C max. )

Product Description:

HP8-EQ-KSL1100X-PC
Combining furnace with laptop computer and control software in one pack to achieve computerized operation.
Chamber sizes: 438 cubic inches of heating area. ( 12" D x 8" W x 5H" or 7.2 Liter )
Operation Temperature: 1100 ^oC( 1200 ^oC Max for short time)
Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation
Three sides resistance wire coil for fast and uniform heating ( click more picture to see)
Also the window can be used as gas inlet by inserting a Alumina tube shown in the photo below.
PID automatic control with 30 segments programmable.
Vent port installed on the top for gas flow. ( gas outlet)
Gas inlet port is optional at $50 extra ( Please choose from product option)

Specifications:

Furnace Construction
Double shell steel casing with cooling fan
High purity alumina fiber insulation with max. energy saving
0.5" diameter observation window made of quartz glass allow user to see insider chamber during operation. ( Optional gas filling port can be added via the window -- see below picture)
Built in RS485 ( or RS232) for computer control
Chamber Cubic Capacity
438 cubic inch , 7.2 Litre
Chamber Dimensions
D x W x H , 11.8 x 7.9 x 4.7" (30 x 20 x 12 cm)
Volts
208 -240V single phase 50/60 Hz
Watts
3500 W
Operating Temp Range
100-1100C ( 1200C Max for short time)
Stability at 1000C
+/- 0.5C
Uniformity at 1000C
+/- 2.0C
Temperature Control
PID automatic control with 30 steps programmable
Built in over-temperature alarm and protection allows operation without attendant Control Software & Laptop computer
One brand new 14" Dell Laptop computer is included with Window XP or Visita system
Control software -MTS-02 is pre-installed with computer
USB cable and plug is included to connect laptop to furnace
Ramp up rate
Max. 50C/ min.
Shipping Weight

110 Lbs
Overall Dimensions
D x H x W 25" x 21" x 27"
Warranty
One year limited
Standard Package includes Items
a built-in 30-segmnet temperature controller
a K type thermocouple
an observation window in the furnace door
a pair of crucible clip
a pair of protective gloves

Optional:--- You can add gas inlet port by order stainless steel tube kit in related product below

Stainless steel tube ( 5 mm dia ) with flange can be added as gas in-let port Replace window by optional tube, you can have gas inlet port Stainless steel tube shall remain inside refractory block

HP8-VF1200D8
Vacuum Box Furnace ( 8" Vertical Quartz Chamber) with Vacuum Flange / Valve & 30 Segments Temperature Controller

Product Description:

HP8-VF1200D8 is a vacuum chamber furnace with 8" diameter x 7" height vertical quartz liner and stainless steel vacuum flange. It is designed for calcining or sintering ceramic material or annealing semiconductor wafer under vacuum or various gas atmosphere up to 1200^oC.

Features:

High quality Ni-Cr-Al resistance wire as heating element and can be heated up to 1200^oC
High purity quartz liner : 8" O.D. x 7.5" I.D x 13.4" Height ( 205 OD x 190 ID x 340 H mm )
Stainless steel vacuum flange with two ball valves and vacuum gauge is included for immediate use.
Built in precision digital temperature controller is 30 segments programmable to control heating rate, cooling rate and dwell time
All accessories are included for immediate use
One pcs refractory disk which shall be put top of inside quartz liner to protect stainless steel from heat damage.

One high temperature gloves using can be used < 900 ^oC

Click the picture below to enlarge for details


7.5"ID(190mm)x 13.4" (340mmH Quartz tube liner with flange	7.5"ID(190mm)x 8.5"H heating chamber inside furnace	One ceramic tube insert to bottom chamber and one is on top to keep gas flow uniform

Vacuum flange with 2 valves and gauge		Two durcooling fans are installed in the back of furnace

Specifications:

Working Temp: 100 - 1200 ^oC ( 1100^oC Max. Continuous and 1200oC Max. < 1 hours )

Refractory Chamber size (with refractory disc in place) : 240 dia. x 220 H (9.5"Dia. x 9.3"H)

Quart Liner size: 205 mm O.D x 190 mm I.D x 340 mm Height

Vacuum flange: Stainless steel with double high temperature silicone O-ring ( up to 300C ).

Two vacuum valves are installed on flanges for gas inlet and out let

1/4NPF female fitting for connecting furnace to vacuum pump or gas tanks

One mechanical vacuum gauge installed on the flange. (You may choose digital vacuum gauge as optional for more accurate pressure display at related product below ).

Vacuum pressure: Depended on vacuum pump limit. For mechanical pump, usually vacuum pressure can reach 10^-2 torr

Vacuum pump is not included, please order vacuum pump separately ( to order separately)

For high vacuum, please choose precision digital vacuum gauge ( to order separately)

Gas flow and pressure: Inert gas and oxygen gas flow can be achieved via two valves.

Max. gas pressure shall be less than 1.2 atm

You may choose flow meter to monitor flow rate ( to order separately)

If use hydrogen gas, the furnace must be placed under fume hood or safe place

Temperature controller: 30 segments programmable with accuracy +/-1.0 C with bright LED digital control panel

Uniformity: +/- 2 C

Power: Single phase 208 - 240 VAC / 50/60Hz , 3000 W max. ( 20 A breaker required )

Overall Dimension: 510 x 435 x 425mm

Net Weight: 35 Kg

Shipping weight: 120 lbs

Shipping volume: 45x28x35"

Applications:

Calcine high purity compound under vacuum or inert gas

Anneal or diffusion semiconductor wafer up to 6 " diameter

HP8-GSL1100
Tube Furnace with 1" Quartz Tube, Vacuum Flange

vacuum flange assembling

Furnace dimension

Product Description:

HP8-GSL1100X1 quartz tube furnace (1" diameter) is designed for firing small sample up to 1100^oC in 1" O.D quartz tube. Stainless steel vacuum flange and quartz tube are included for immediate use. Built in precision temperature controller can program heating rate, dwell time and cooling rate up to 30 segments. The furnace can be set up in both vertical and horizontal position to meet various applications such, firing sample, VSL or CVD and quenching test.
Energy saving design: Heating elements embedded in high purity alumina fiber insulation provide rapid chamber heat-up and cool-down at less than 1000 W
12" (30 cm ) heating length and 3.1"(80mm) constant temperature zone
Compact design: only 10" x 15" x 16" foot print and can be placed in desk top
Smart temperature control: 30 segment programmable with auto-tune PID function , protection from over-heated
All in one package, including
1"dia x 24" L quartz tube
one pair of porous ceramic block
one pair stainless steel flange with high temperature silicone o-ring, which can be connected to 1/4 copper , stainless steel or PVC tube ( not included )
Two vacuum valves and one pressure gauge are installed with flanges
Power cord ( no plug)

Specifications:

Quartz Tubes: 1" O.D x 0.87" I.D x 24" L
Amps: 5 Amp
Operating Temp Range: 100-1100, 1200C Max < 2hrs
Heating zone length: 12" ( 300 mm )
Constant Temperature zone: 3.1" ( 80 mm )
Overall Dimensions D x H x W: 10" x 15" x 16"   (26 x38 x40 cm)
Temperature Controller: Programmable , 30 segments with +/-1^oC accuracy
Voltage:       208 - 240 V AC single phase standard
Power:          1200W Max.
Shipping size:   21"x23"x25"(530 x 590 x 640mm)
Shipping weight:   40 lbs(18kg)

Quartz Tube: 25 OD x 21 IDx 600 L mm (1" D x 24" L) for DIY Tube Furnace

HP8-EQ-KSL-FB1318M
Bench-top Muffle Furnace (4x3.8x5", 1.3L) upto 1100 C

Product Description:

Ceramic fibre insulation permits faster heat-up, reduces energy consumption.
Embedded heating element on top and both sides improves temperature uniformity.
Drop-down door doubles as a convenient shelf for loading and unloading.
One 4.75 mm O.D. ( 3.75 mm I.D) x 100 mm length ( 4") alumina tube is included for setting up a vent port
4 pcs 25 mm dia x 25H Alumina Crucibles with Cover are included for immediate use
Euthermo single set point temperature controller
All models shipped complete with power cord.

Digital single set point temperature control showing actual temperature or set point, made by Eurotherm

Vent port is located in the back, 4.75mm alumina tube is included
4 pcs Alumina crucibles included for immediate use

Operation:

Temperature Control
Digital single set point control. A single display shows actual temperature or set point.
Click here to download Operation Manual
Safety
Door safety switch protects operator by removing power to the heating elements upon opening the door.
Thermocouple break protection cuts power to the heating elements, prevents a thermocouple failure runaway condition.
The rear of the chamber incorporates a 0.38" (0.95 cm) diameter port for monitoring chamber temperatures with independent measuring devices.
Applications
Ashing most types of organic, inorganic samples
Heat treating small steel parts
Ignition tests
Gravimetric analysis
Determination of volatile and suspended solids

Specifications:

Chamber Cubic : 1.3 L
Chamber Dimensions D x H x W: 5.0 x3.8x 4"
Volts/Amps/Hertz: 208 -240VAC/ 50/60 / 8.9/5.1
NRTL: false
Operating Temp Range: 100-1100c
Overall Dimensions D x H x W: 13 x14 x 9" (33x36x23 mm)
Stability at 1000c: +/- 0.3 C
Temp Control: Digital single set point
Watts: 1060
shipping dimension: 19" x 16" x 15"
shipping weight: 22lbs

HP8-KSL-1700X
Bench-Top Muffle Furnace (1700C, 6"x6"x6", 3.6L) with Temperature Controller

Product Description:

The furnace consists of high quality alumina fibre brick and MoSi2 heating elements with special design, and furnace temperature is controlled by high precision SCR ( Silicon Controlled Rectifier) digital controller with accuracy +/-1 C and 51 segments programmable up to 1700 C or 3092 F. It is an ideal tool for materials annealing and sintering in your research laboratory

Operation:

Furnace casing: Double layer steel structure with air cooling fan to keep case temperature below 55oC
Standard Working Temperature: 1600 C or 2912 F ( continuous )
Maximum Working Temperature: 1700 C or 3092 F( < 3 hours)
Temperature Control: PID automatic control via SCR ( Silicon Controlled Rectifier) power control, e.g. current limiting phase angle fired the resistor with 51 steps programmable
Please click here to learn why SCR is more accurate than SSC ( Solid satet relay)
Heating Rate: 0 ~20 C / min (suggestion =< 10 C )
Temperature Accuracy & stability: +/- 1oC
Temperature uniformity: +/- 5 oC over 120 mm (5") @ 1700 C, +/- 2 C over 80 mm (3") @ 1700 C
Heating Element: MoSi2 ( 4 pcs U shape )
Thermo Couple: B Type (Pt-Rh to Pt-Rh)with Alumina tube

Specifications:

Voltage:   AC 208V-240V single phase, 50/60 Hz ( 50A air breaker required)
Max. Power: 4KW
Inner Chamber size:   160 x 150 x 150mm (6.3" x 5.9" x 5.9"), 3.6L
Outside Size: 515 x 500 x 730 mm (20.28" x 20" x 28.75")
Shipping size:   480x500x625 mm
Net Weight: 120 Kg (265 lbs), Shipping weight:   380 Lb
Limited Warranty: One year manufacture limited warranty and free replace all defective parts (not including spare parts).

Standard Package with the Furnace:

P/N	Description	Quantity
KSL7-00	KSL-1700X High Temperature Muffle Furnace	1 set
KSL7-01	MoSi2 Heating Element, 4 pcs installed in furnace	4 pcs
KSL7-02	B-Type Pt-Rh to Pt-Rh Thermocouples with Alumina Protection Tube	1 set
KSL7-03	Al2O3 Sample Plate	1 pcs
KSL7-04	Al2O3 Furnace Door Block	1 pcs
KSL7-05	Protection Glove	1 pair
KSL7-06	Crucible Clip	1 pair
KSL7-07	Operation Manual	1 set	View product manual

Warning:

MoSi2 heating element is used in the high temperature under oxidizing atmosphere. It will form the SiO2 film which can keep the element from being melted. During the oxidizing process, the SiO2 protecting film is formed again when the element continues to be used. The MoSi2 heating element must not be used in the temperature between 400 C and 700 C for a long time, otherwise the element will be cremated under the strong oxidizing function in the low temperature.

HP8-SYJ-200
Automatic Section Saw ( 8") with complete accessories

Product Description:

HP8-SYJ-200 automatic diamond saw is designed for precision cutting all type of materials up to 3 " diameter. The saw is equipped with 8" diameter diamond blade and touch-push panel to achieve automatically control. It is perfect cutting tool for metallurgical, ceramic and materials research laboratories
1 HP high torque DC motor
1" dia spindle and 2" flange to accept 6 - 8" dia diamond blade
Variable blade speed: 100-4500 RPM with screen touch control panel and digital display
Cutting capacity: 3" Deep x 4" L x 3.5" W
Programmable Y and X axis advancement via LCD panel to achieve automatic cutting with 0.01 mm precision.
X axis is for cutting feed which has Max. travel distance of 120 mm and adjustable speed from 1.0 mm/ minute to 20 mm/minutes
Y axis is for controlling thickness of slices, which can be programmed up to 90 mm distance.
Quick clamp is included to make sample mount easy and fast
Protective splash cover with electronic safety interlock
Re-circulating coolant system with adjustable nozzles
One 8" diameter x 0.025" thickness and 1"airbor sintered diamond blade is included for immediate use

Specifications:

Power: 208V-240VAC 800W
Dimension of shipment : 622mm x523mm x460mm
Weight of shipment : 65 Kg

Optional Heavy Duty Coolant Circulating Tank with Pump 6L coolant circulating tank which perfectly connects to HP8-SYJ-200

6 liter capacity heavy duty coolant circulating tank is designed for cutting saws to provide coolant circulation

Operation power: 110V - 240V

6 Liters stanless steel tank with 1" drain port and 1/4" outlet port

Built in 40W fluid pump Flowing rate: 12L/min.

Pumping height: 3 meters Max.

Dimension: 270mm x220mm x320mm

Plastic Hose: 8.05mm O.D. 2.3m Length (7.5 feet)

Water Inlet: 25.4mm I.D. 31.75mm O.D.

Weigh: 3kgs

Warning:

Must use anti-corrosion coolant during cutting to avoid rusting lead screw. Please never use water as coolant during cutting. You may select our LubeCool-150 lubricant as coolant , and order optional coolant circulation system at related product, which will make diamond blade cut more efficient and keep the machine from corrosion. Also, you can use W10-30 motor oil as coolant, which is available at any Auto store.

Always clean machine, especially on lead screw by W40 lubricant after each using, and make sure X,Y axis can move freely without blocking and rusting

HP8-MT-4
High Speed Diamond Cut-off Saw with Vise and 5 pcs 4" diamond blades

Product Description:

HP8-MT-4 Manual 4" Diamond High Speed Cut-off Saw with Vise and 5 pcs of 4"Dia x 0.35 mm x 0.5" Arbor Impregnated Diamond Cutting Blades

Specifications:

4" Manual Cut-off Saw is the perfect tool for quickly cutting valuable materials, such crystal rough, ceramic, metal rod and almost any material before lapping and polishing.

The saw table is flat so it is easy to trim oversized slabs and removable so clean up is easy. The sturdy table measures 6" X 10", easy to operate.

The saw housing is made of unbreakable cross-linked polyethylene - No Rusting, No messy oil, uses water only.

The 1/4 HP equivalent variable speed ball bearing direct drive motor allows the saw to run fast enough to use ultra thin diamond blades and it is powerful enough for impregnated diamond blades. Speed varies from 400 -3250 RPM

Max. cutting depth: 1" (25.4 mm)

Comes with 5 pcs of impregnated diamond blade of 4" Dia x 0.014" (0.35 mm ) thickness x 1/2" arbor, as well as a vise which allow you keep sample smoothly. If you try to cut soft material, such as Ni, Cu or plastic choose4" SiC blade

Shipping dimension: 16" x 13" x 11"

Shipping weight : 16lbs

4"Dia x 0.35 mm x 0.5" Arbor Impregnated Diamond Cutting Blade. 5 pcs included

HP8-Unipol300
3" Automatic Grinder/ Polisher with Complete Accessories

Product Description:

HP8-Unipol 300 is a automatic mini-grinder / polisher for preparing TEM, metallographic, and substrate samples in a single mount. The machine equips with many advanced features, such as 3" fix lapping plate, variable sample moving speed, adjustable pressure load and selectable time switch to achieve attention free polishing. Unipol 300 simulates human hand to grind and polish sample via randomly moving sample holder on top versus fixed 3" plate. It is very suitable for preparing < 1" dia specimen in low volume laboratory for material research, failure analysis and medical test. By combining our SYJ low speed saw, you can own a processing lab on one desk to prepare versatile specimen at affordable budget.

Specifications:

Easy to use and affordable price.

Variable moving speed for the sample holder on top

Adjustable pressure load by a spring inside from 0 - 5 Newton

Automatic timer setting from 0 to 99 hours

One rubber polishing bowl with one 3" glass lapping plates are included

Extra rubber bowl and 3" glass lapping plate are available as option.

Two 1" dia. sample holders are included

one for flat sample as shown inside plate in the picture left
Another holder for inserting bulk sample as shown on top machine.
Compressing or cold mount sample can be used as sample holder ( make a hole in round sample mount centre, put moving rod on the hole )

Power: AC 220V selectable for worldwide operation

Max. moving weight of specimen: 200g, Max. sample size: 25 mm dia. x 20 mm H

Overall dimension: 420mm L x 190mm W x 210mm H.

Net Weight: 24 lbs, Package dimension: 18" x 11" x 9", Shipping weight: 32 lbs

Standard Package Included in the Unipol 300 Grinder / Polisher

P/N	Item Name	Qty
UP-300-01	Unipol 300 Grinding / Polishing Machine	1
UP-300-02	Rubber polishing bowl	1
UP-300-03	3" glass lapping plate	1
UP-300-04	1" dia. sample holder for flat sample	1
UP-300-05	1" dia. sample holder for inserting bulk sample	1
UP-300-06	AC power cord	1
UP-300-07	Operation manual	1
UP-300-07	1 set of 3 syringes (10g) diamond paste with 0.25, 1.0, and 3.0 micron grit	1 set

HP8-Unipol-830
Heavy Duty Belt driven 8" Grinder / Polisher with Magnetic Plates & Complete Accessories

Product Description:

HP8-UNIPOL-830 is heavy duty 8" grinder / polisher with belt driven and quiet operation. It comes with magnetic disk and complete accessories and allow user to change grinding / polishing plates at quick and easy. It is ideal tool for preparing metallographic sample manually

Specifications:

Heavy duty fiberglass case with anti corrosion painting surface.

Belt driven 8" platen with high torque, which is much stable

Power: 220 V switch able power supply, worldwide support

Motor: 300W DC motor with belt pulley

Variable speed: from 0 - 600 RPM with digital display for each plate

8" Aluminum lapping plates can be quickly released and installed.

Soft rubber splash guard for safe operation

Dimension: 490mm x350mm x250mm

Aprox. net weight: 36 Kg

Shipping package dimension: 43x23x20"

Shipping weight : 150 lbs

Complete accessories included for immediate use $200 value

One Aluminium alloy master plate; 8" dia lapping plate

One 8" dia.x 0.8 mm thick permanent magnetic sheet with PSA backing ( installed in Aluminium plate )

One 8" dia. Diamond Lapping plates with 320 mesh and 600mesh separately (without PSA can be attach to magnetic plate directly )

Two 8" dia x 0.7mm thick steel buffer sheet (Zinc coated) for carrying sand paper and polishing pad, which can be attached to magnetic plate at stable and take off at easy

8" Sic sand papers ( 2 of each at mesh of 240#, 400# , 800# ,1500# )

One 8" PSA black polishing pads for final polishing

One 10g 1.0 micron diamond paste for faster polishing

HP8-SFM-3
Bench-Top High Speed Vibrating Ball Mill with 80ml Stainless Steel Jar

Product Description:

HP8-SFM-3 is a compact high speed vibrating ball mill for making small quantity of powder samples at easy and fast. It has higher impact energy created by three dimension movement, e.g. rotation, vibration and oscillation with frequency up to 1200 cycles per minute with low noise. The SFM-3 can be used in either dry or wet method to mill materials and mix all kinds of solids, suspended liquids and pastes with different sizes and materials. It is deal equipment to make small quantity sample in material and chemical research lab.

Specifications:

Oscillation frequency: 1,200 rounds/min

Timing range: 0 to 120 minutes for built in mechanic timer

External programmable timer is available as option ( please see the picture below and choose from product option)

One 80 ml stainless steel jar with one set of SS balls (2 pcs of 19.5 mm, 2 pcs of 10.0 mm, and 8 pcs of 6.0 mm ) are included.

Maximum feeding capacity: 1/3 of the capacity of the ball milling tank

Feeding granularity: <1mm

Discharging granularity: 0.1 micron minimum

Motor: 180W

Power Input: Single-phase 208 - 240V AC (standard )

Overall dimensions: 405x365x260 (mm)

Net Weight: 40kg

Shipping Weight: 112 lbs with 22x22x16" (or with Pallet: 135 lbs with 26x26x24")

Optional jar available at extra cost in product option:

Standard 80 ml stainless steel Jar assembling with one set of SS balls (2 pcs of 19.5 mm, 2 pcs of 10.0 mm, and 8 pcs of 6.0 mm ) 80 ml Vacuum stainless steel jar with valve) 50 ml Alumina Jar assembling

HP8-SFM-1
Bench-Top Planetary Automatic Ball Mills with 4 Alumina Jars (4x500ml)

Product Description:

HP8-SFM-1 planetary ball mill is designed for mixing, fine grinding, and preparing small volume high-tech material production. The product features with small volume, high efficiency and low noise. If mated with vacuum ball milling tanks, it can grind samples in vacuum or inert gas. The product is extensively used in the fields of Geology, Mining, Metallurgy, Electronics, Construction Material, Ceramics, Chemical Engineering, Light Industry, Medicine, and Environmental Protection etc.

The SFM-1ball mill has four ball grinding tanks installed on one turning plate. When the plate rotates, the tank axis makes planetary rotation in opposite direction and the balls in the tanks grinds and mixes samples in high speed movement. The product can smash and blend various products of different materials and granularity with dry or wet methods. Minimum granularity of grinded products can be as small as 0.1 micron.

Complete package , including four 500 ml Alumina jars and 32 ZrO2 milling balls ( 8 balls per tanks) ( No stainless steel balls used in Alumina jar) for immediate use

Specifications:

Voltage: AC 206 - 240V ( single phase )
Power: 500W Max
Speed control: Variable by changing frequency of AC motor

Rotary Rate:

Main plate rotation in cycle: 30-350 rpm

Mixing tank rotation in its selves: 60-700 rpm

Please view the video for the performance of the tank rotation (Slow to fast)

Digital display

Digital display the speed in RPM

Timer controls major platen's running time from 1 to 999 minutes

Timer control tank rotation time from clockwise to anticlockwise direction: 1- 99 minutes

Dimension 450 x 490 x 530 mm

Four 500 ml Alumina jars are included

32 ZrO2 (YSZ) balls with various size are included ( 8 balls per jar)

Following jars are available as optional ( click products option to see pricing)

O-ring can be inserted between the lid and jar for wet grinding(ID:90mm,OD:104mm)


Max. 500 ml Alumina Jar (included)	4 pcs o-rings	Max. 500 ml stainless steel jar ( optional)

500ml Stainless steel jars (D90xH85) ( 12 stainless steel balls per jar included ) are available at extra cost In order to mill efficiently, material particles shall be less than 14 mesh 1 pcs 14 mesh for separating samples is included.

HP8-EQ-SH-3

Hot Plate with Magnetic Stirring: 6.7"x6.7" Stainless Steel Surface Max. 300C

Product Description:

HP8-EQ-SH-3: Flat top and high-wattage heating elements combine to provide superior heating transfer and fast time-to-boil with max working temperature 300

Three sizes of stirring rod are included and offer flexibility from micro scale chemistries to larger vessels.

Integral ring-stand holder accommodates 0.5" (1.3 cm) diameter support rod.

Rugged low-profile cast aluminium body provides stability and durability.

Accommodates sample volume: 1000 ml

Magnetic stirring technology offers consistent speed control and stronger magnetic coupling.

Adjustable speed range from 50 to 1600 rpm.

Specifications:

Amps

2

Top plate Surface D

6.7" (17 cm)

Heating Surface Material

Stainless Steel plate

Top plate surface W

6.7" (17 cm)

Hertz

50/60

Operating Temp Range C

5 C - 300 C

Overall Dimensions

10 (25)x6.0 (15)x7.0(17.5)

Shipping Weight Lb (Kg)

11 (5.0)

Stirring Speed Range

0 to 1600

Volts

220V

Watts

500

Shipping weight

7.5 lbs

Shipping volume

11x8x6"

HP8-EQ-SP-131320Q
Digital Hot Plate/Stirring Hot Plate 7"x7" Ceramic Surface upto 540C

Product Description:

HP8-EQ-SP-131320Q
Easy-to-read digital display indicates temperature settings, adjustable in 5 C increments, from 5 C up to 540 C

Microprocessor-controlled feedback technology maintains consistent, repeatable temperature settings. Ideal for labs that perform repetitive procedures.

Hot surface alert safety systems protect from accidental burns. Bright red warning lights signal when heating surface is above 50C . Unit display flashes "HOT" - "OFF" when heating is turned off, until heating surface is below a cool 50C
Flat top and high-wattage heating elements combine to provide superior heating transfer and fast time-to-boil.
Three sizes offer flexibility from micro scale chemistries to larger vessels.
Integral ring-stand holder accommodates 0.5" (1.3 cm) diameter support rod.
Rugged low-profile cast aluminium body provides stability and durability.
Accommodates sample weight t 0 25Lb (11.3 kg)
All models supplied with detachable cord and 2" x 3/8" dia. TFE-coated stir bar
StirTrac technology offers improved slow speed stirring, consistent speed control and stronger magnetic coupling. The StirTrac braking feature brings the stir bar to an immediate stop for quick flask removal.

Adjustable speed range from 50 to 1200 rpm.

Specifications:

Amps
8.6/5
Top plate Surface D 7.25 (18.4cm)
Heating Surface Material Ceramic
Top plate surface W 7.25 (18.4cm)
Hertz 50/60
Operating Temp Range C 5 C - 540 C
Overall Dimensions D 13 (33)x3.8 (9.7)x8.2 (20.8)
Shipping Weight Lb (Kg) 11 (5.0)
Stirring Speed Range 60 to 1200
Volts 230
Watts 1170
Shipping weight 12 lbs
Shipping volume 17x7x11"

HP8-iB601

Precision Digital Balance with Wind Screen, 600 g x 0.01g

Product Description:

HP8-IB601 is a high capacity professional precision scale with a multitude of features that is sure to meet the highest of expectations. The i601 has a 600 gram capacity with a readability of 0.01g. It features two bright LED displays (on opposing sides), which make it perfect for showing the weight to others, and multitasking. This scale even has a rechargeable battery so you won't have to worry about the added expense of buying new batteries...EVER!
If you have been looking for a high precision, high capacity scale packed with features for your lab., you can stop looking right now! The i601 has an RS 232 port for computer connectivity, a rechargeable built-in battery, a stainless steel weighing tray, parts counting, a wind cover, adjustable feet, a level bubble, and more. It is a true 60,000 division scale that uses high precision German sensors.
Applications:
It is excellent for weighting chemicals before mixture in material labour
It can be used for monitoring weight change of sample before and after sintering in furnace

Specifications:

Reads 600g x 0.01g
Rechargeable Battery Included
Dual LCD Display
Reads in Gram, Troy Ounce, and Carat Weight
Advanced Parts Counting Feature
Adjustable Weight Response Speed
Included SS Tray and Wind Screen
Adjustable Auto-Zero Tracking
Digital Auto Calibration
Levelling System
Tare Function (up to 600g)
Net Weight / Stability and Low Battery Indicators
AC Adaptor Included
Full Lifetime / 30 Year International Warranty
Shipping: 5 lbs with 12x10x5" volume

HP8-YLJ-20T
Desktop Electric Cold Iso-static Pressing Presser

Product Description:

HP8-YLJ-20T is a compact electric cold isostatic presser. It has a 30mm ID x100mm hydraulic chamber made by ultra strength alloy , which can provide isostatic hydraulic pressure up to 278MPa via a 20T electric hydraulic press. It is excellent CIP for material research lab to prepare high density compound sample at easy. It has small footprint and can be placed in glove-box to prepare air-sensitive materials. A plastic protection cover is included

Pressure Chamber Size	30mm dia. x 90mm Height
Ma. Hydraulic Pressure in Chamber	278 Mpa ( 43500 PSI)
Hydraulic Machine	20 T
Operation Temperature	10 - 40°C
Dimension of Working Space	D1: 98mm D2: 88mm H1: 345mm H2: 330mm
Overall Dimension (including 20T Presser)	440 L x 430W x 560H, mm
Net Weight	100 kg
Warranty	One year

Accessory:

Warning: Always wear protection goggles during operation !!!

HP8-YLJ-40T
Desktop Electric Hydraulic Laboratory Presser

Product Description:

HP8-YLJ-40T is electric hydraulic pressing machine up to 40 metric tons for preparing compound or ceramic sample faster and easy. EQ-YLJ-40TA has built in hydraulic pump which is driven by electric oil pump with larger pressure gauge. The pressure can be pre-set and pump will stop automatically once the pre-setting pressure reach. It is an excellent tool for material / ceramic / chemistry laboratories to make larger pellet sample.

Specifications:

Max Pressure : 40 Metric Tons
Pressure stability 1MPa /10min
Electric hydraulic pump: Standard: 220V AC ( single phase ) 180W
Pressure gauge with built in pre-stable pressure switch (accuracy +/-0.5% FS)
Bottom hydraulic cylinder travel distance: 0 - 25 mm
Top support screw adjustable height: 180 mm
Working space under frame: 155 (L) x 100(W) x 180 (H), mm
Dimension of Machine: 370 (L) x 350 (W) x 450 (H), mm
Net Weight: 55 Kg ( 121 lbs)
Dimension of shipment : 39" x 31" x 35"
Weight of shipment : 185 lbs
Press Dies : Pressing dies with various diameters are available upon request at extra cost

Warning: Always wear protection goggles during operation !!!

HP8-EQ-HP-58V220
Desktop Flat Hot Presser (5" x 8") up to 260C

Product Description:

HP8-EQ-HP-58V220 is a heavy duty cast iron and aluminium constructed.

Specifications:

Stainless steel heating platens.
Large handle and sturdy 1" diameter pressure screw.
Two large diameter guide rods keep platens (6.7" x 8") in alignment.
Thermostat with dial for accurate temperature control up to 500 ^oF (260^oC).
Equipped with power and thermostat pilot lights and on/off switch.
Predrilled holes in base for easy mounting.
Dimension: 13" wide x 7" deep x 18" height.
Shipping weight is 110 lbs.

Applications:
It is an idea tool for hot pressing ceramic powder and bonding target backing plate in material research lab.
Both upper and lower pressing plate can be heated by a conducting cable, please click the picture below for details:

Warning: Always wear protection goggles during operation !!!

HP8-GSL1100 Tube Furnace with 1" Quartz Tube, Vacuum Flange

HP8-SFM-1 Bench-Top Planetary Automatic Ball Mills with 4 Alumina Jars (4x500ml)

Hot Plate with Magnetic Stirring: 6.7"x6.7" Stainless Steel Surface Max. 300C

Precision Digital Balance with Wind Screen, 600 g x 0.01g

HP8-GSL1100
Tube Furnace with 1" Quartz Tube, Vacuum Flange

HP8-SFM-1
Bench-Top Planetary Automatic Ball Mills with 4 Alumina Jars (4x500ml)